Stopping distance calculator
Pick a speed to see how far a car travels before it stops, using the typical stopping distances from The Highway Code. Handy for theory test revision and a good reminder for every driver.
Highway Code stopping distances
| Speed | Thinking | Braking | Total | Car lengths |
|---|---|---|---|---|
| 20 mph | 6 m | 6 m | 12 m | 3 |
| 30 mph | 9 m | 14 m | 23 m | 6 |
| 40 mph | 12 m | 24 m | 36 m | 9 |
| 50 mph | 15 m | 38 m | 53 m | 13 |
| 60 mph | 18 m | 55 m | 73 m | 18 |
| 70 mph | 21 m | 75 m | 96 m | 24 |
Source: The Highway Code, rule 126. Car lengths are based on an average car length of four metres.
Thinking distance and braking distance
Thinking distance is how far the car travels between you seeing a hazard and pressing the brake. Braking distance is how far it then travels until it stops. Thinking distance grows in a straight line with speed, but braking distance grows much faster: going from 30 mph to 60 mph roughly quadruples it, from 14 metres to 55 metres.
The two-second rule
The Highway Code says to leave at least a two-second gap to the vehicle in front on roads carrying fast traffic and in tunnels where visibility is reduced. That gap should be at least doubled on wet roads and increased still further on icy roads.
To check it, pick a fixed point such as a lamp post. When the car in front passes it, say “only a fool breaks the two-second rule”. If you pass the point before you finish, you're too close.
Wet and icy roads
In the wet, stopping distances will be at least double those on dry roads (rule 227). On ice they can be ten times greater (rule 230), so a stop that takes 23 metres at 30 mph in the dry could take far longer on a frosty morning.
Tyres matter too. Worn tyres take longer to stop, especially in the wet. If you're buying a used car, check the tread on all four tyres, using our used car checklist, and see what a tyre size means with the tyre size calculator.